Minimalist Wave Soap Dish | Self-Draining Bathroom Holder

💎 To get the full library of 3D models with commercial use and Custom Orders, join our Patreon here: https://www.patreon.com/thegulzar3d

🧼 Minimalist Wave Soap Dish | Keep Your Soap Dry & Lasting Longer

Clean Scandinavian lines. Maximum airflow drainage. 100% Support-Free.

Upgrade your bathroom vanity, shower ledge, or kitchen sink with the Minimalist Wave Soap Dish. Engineered with functional elegance, this holder uses a series of precision-angled ridges to elevate your bar soap above standing water, ensuring 360-degree airflow so your soap dries quickly without turning into a soggy mess.

Designed exclusively as a fast, reliable print for the Makeronline community, this monolithic one-piece model requires zero supports, uses minimal filament, and features smooth, continuous grooves that make cleaning under the faucet effortless.

✨ Key Design Features

• 🚫 100% Support-Free: Clean, self-supporting geometry prints flat on your build plate with zero filament waste and zero cleanup.
• 💨 Fast-Drying Ridges: Elevated V-channels minimize contact area with the soap, allowing moisture to drain and air to circulate freely.
• 🧼 Universal Bar Fit: Generous surface area comfortably holds standard, oversized, and artisanal handmade bar soaps or kitchen sponges.
• 🚿 Low-Maintenance & Hygienic: Smooth, sweeping valleys prevent soap-scum buildup and rinse clean in seconds.
• ⚡ Rapid & Reliable Print: Simple, robust design with no moving parts or assembly—an ideal quick project or practical gift.

📐 Dimensions & Specifications

• Footprint: Sized universally for standard bath and kitchen soap bars (~115 mm × 80 mm × 18 mm).
• Print Style: Solid monolithic print (1 piece, no assembly, no glue needed).
• Bed Compatibility: Fits easily on any FDM 3D printer (including compact 180 × 180 mm beds).

⚙️ Printing Settings

• Support: None Required.
• Design Note: Sloped wave ridges are completely self-supporting.
• Orientation: Print flat on its bottom face.
• Layer Height: 0.20 mm (or 0.16 mm for ultra-smooth ridge crests).
• Wall Loops: 3 to 4 loops (Crucial to ensure solid, non-porous outer surfaces that resist water ingress).
• Infill: 15% (Gyroid).
• Material: PETG (Highly recommended for bathrooms due to superior water, chemical, and soap-scum resistance) or PLA / Matte PLA.